How do you replace the headlight bulb located on a 2000 Oldsmobile Bravada?
There should be 2 plastic or metal pieces behind the headlights if you pull up on the lip of them they should release the headlights, then change your bulbs and set them back in the front of the car and replace the holders. They are long and thin and have holes with open space above the hole to hold them in place.
Each of the headlight assemblies are braced through the radiator support with a pair of retainers. The retainers for the right headlight assembly are in front of the battery. The retainers for the left assembly are in front of the washer fluid reservoir. Remove the retainers by pulling up on the retainer. With the retainers removed, the headlamp assembly falls forward. Reinstall the retainers to the square tabs on the headlamp assembly and the rivet…
to replace the headlights on your aurora, theres 2 silver looking screws on top of the headlight assembly under the hood. take those screws out(1 long and 1 short) and CAREFULLY pull forward on the entire light assembly. theres tabs on the far inside of the light assemblies that can be loosened with a flat head screwdriver. good luck.
To replace the headlight bulb in a Nissan Pulsar a person must first find the headlight assembly which is slightly behind the lamp housing. Once the headlight assembly is accessed, all an individual would have to do is loosen the bulb a half turn and the whole thing comes out, then replace with the new bulb using the reverse method.