Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
How do you replace 2003 nissan maxima headlight?
how do i replace the drivers side headlight in a 2003 oldsmobile silhoutte
“how to replace headlight bulb 2003 park ave”
To replace the headlight on a 2003 Chevy Monte Carlo, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it off. Remove the retaining ring or clips that hold the headlight in place, then carefully pull out the old headlight bulb. Insert the new bulb without touching the glass, reattach the retaining ring, reconnect the electrical connector, and test the headlight.
the horn is easier to get to,if you remove the right side headlight housing!! then you can see horn.
There is a bolt with a torx bit head on it behind the headlight if i remember right there should be two of them one is for up and down the other is for in and out.
There are 2 long clips behind the headlight housing, remove them and the housing will lift out. Then just unscrew the bulb and replace with a new bulb.
Usually underneath near the back axle.
you fix it by a mechanic
If its anything like my 04 sonoma, there should be two flat pins which hold the headlight assembly in place. the pins come out, the socket for the bulbs become acessible. twist out and replace. .
how do u replace a flywheel in a Chevy zr2 s10 2003 v6
the air box by the right headlight has three quarter turn screws remove, lift up ,and replace. easy