1999 3.1L model. On each side there is a flat shroud roughly 9 inches long held in place by one screw with a rather large washer. Remove this screw and turn the shroud out of the way. Beneath you will see two tabs per fixture with semi-circles towards the front of the vehicle. Lift these tabs straight up off the two spheres per tab. The headlamp fixture will come away suspended by the wiring. There are two fasteners holding in the sockets however it is possible to remove the bulbs without disturbing these fasteners. Simply turn the sockets anti-clockwise to separate one from the other. Do not touch the glass portion of the bulbs, new or used with your bare hands. They could explode or you will make the bulb inoperable. Usually the low beam and high beam bulbs differ and one will not fit the other's socket. When purchasing be sure to match carefully. .
The bulbs unscrew from the back of the light assy. sometimes you have to remove it to get to the back.
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
I've got a better question, why is this question in the Chevy venture forum ?
Pull the complete headlight assembly out to get to the bulbs. You first have to pull the front bumper off, along with the wheel well to get to the headlight assembly.
How do you replace vent windowin a 2005 chevy malibu?
the horn is easier to get to,if you remove the right side headlight housing!! then you can see horn.
When you open the hood look above the headlight for two round plastic caps. Pull these upwards, it releases the light assembly.
Where is the ecm located in a 2000 Chevy Malibu
HOW TO REPLACE A STARTER ON A 1998 CHEVY MALIBU
Located in the fuel tank -have to remove for access
#9006.
How do you change the fuel pump on a 2003 Chevy Malibu?