Raise the hood and on either side there are two 7mm bolt heads, on top of the metal frame, pointing downward. Remove these two bolts (one long and one short) and this will release the headlight unit. Pull it out far enough to unplug the bulb and turn the large plastic retainer nut and remove the bulb. The headlight unit may be caught on the plastic cowling and you may have to depress the plastic cowling in order to slide it out. You also may have to release the two plastic retainers that hold the top of the plastic cowling to the metal frame. If you do, pop up the centers and then remove the retainer. Cowling can then be moved enough to get the headlight unit out.
A 2005 Chrysler Sebring does not have a distributor.
A 2005 Chrysler Sebring does not have a reset switch.
No, a 2005 Chrysler Sebring does not have a cabin filter.
To replace a thermostat on a 2005 Chrysler Sebring first drain the coolant from the vehicles radiator, the engine must be shut off during this repair. Then follow the main radiator line to the thermostat housing. Remove the housing and replace the thermostat inside. Refill the coolant.
There are four mounts on a Chrysler Sebring.There are four mounts on a Chrysler Sebring.
There is no set interval. It only needs replaced if there is a failure.
No.
Replace the timing belt every 100,000 miles.
A Chrysler Sebring does not have a reset switch. The fuel system is computer controlled with relays.
A Chrysler Sebring does not have an inertia or reset switch.
the 05 sebring is fuel injected so there is no carbuatr
The camshaft is in the cylinder head.