Easily. Look closely at the headlight assembly, there will be 2 plastic L shaped pieces, but all you will be able to see are the top of it. I believe there is even a hole drilled through the "L" portion of it that sticks out. Pull up on those 2 "L" pieces, and I don't think they will come all the way out, but will move up an inch or so, and then the whole headlight assembly comes out. Once it's out, unplug the connector, and turn the plastic retaining ring around the headlight counter clockwise, and it should come off, then pull the headlight bulb out. When you put the new one in, don't touch the glass portion or your bulb won't last long at all. Install is reverse of removal.
how to replace actuator on a 2000 malibu
if you do not have a manual for car, call any auto parts place to find out....
you dont,
if parking brake is on, the headlights when first started, will not work until brake is released.
You get a pro to do it.duuuhhhh
how do you replace front passenger window switch on a 2000 chev malibu
To replace the cord for a block heater on a 2000 Malibu, unplug the old cord from the block and plug in the new one. The end of the block heater cord can be found by tracing the cord back to where it is plugged into the motor.
Specify what you mean.
twist the black tube (where the wires come out) it will click, remove the bulb holder , replace bulb refit
usually 1200-1800 at a trans shop.Dealers are twice that.
It should take less than an hour.
http://youtube.com/watch?v=dcXOZFKPudY Although this video is for a bumper removal, the first minute and a half shows you how to remove the headlights.