A video of the following steps has been included below to show this process.
there are 2 pins just behind the headlight on the core support
twist and slide out the 2 pins and tilt out the headlight
remove electrical connector
twist out lightbulb
make sure you do not touch the glass on the new bulb
replace in reverse order making sure to locate the two bottom tabs in the proper holders before sliding in new pins
1
Open the hood of your SRX and disconnect the power connector from the back of your headlight. Squeeze the tabs on the connector and pull the connector off the back of the headlight.
2Pull the rubber dust cover off the back of the headlight housing.
3Rotate the collar on the headlight counterclockwise and pull it out of the headlight assembly.
4Insert the new headlight and turn the collar clockwise to lock it into the housing assembly.
5Replace the dust cover.
6Reconnect the power connector to the headlight.
No. the headlights are terrible. I would be better off with a set of candles.
instruction on how to replace headlights on 2006 murano
The 2007 GMC Yukon has 16 valves.
The 2007 GMC Yukon has a V8 engine.
how do i adjust the headlights on 2007 GMC Acadia
The 2007 GMC Yukon has a 4-speed automatic.
The 2007 GMC Yukon has overhead valves (OHV).
The 2007 GMC Yukon is a gas-powered vehicle.
The 2007 GMC Yukon-XL has 16 valves.
The curb weight of the 2007 GMC Yukon is 5273 lbs..
The 2007 GMC Yukon-XL has a V8 engine.
The 2007 GMC Yukon runs on regular unleaded.