How do you replace the inside door handle on a Hyundai elantra?
Unscrew the door handle. Unscrew the "cup" you pull on to close the door. Unscrew the rest of the screws around the bottom and rear of the door panel. Slide the door handle sideways and pull it free. You will need to unclip the long metal rods from the back of the handle, which may be easier with your arm inside the door panel. Put it back the opposite of how you took it apart…
To replace the door handle on a 1968 Beetle, the inside door panel needs to be removed. First, remove any light lenses in the door, then remove the clips on the sides and corners. The old door handle can be removed by loosening the screws on the inside. Then, position the new door handle and tighten the screws. Replace the door panel by popping it back into place.
I had problem on my 2001 Elantra with power for radio, inside light and trunk light. I found the fuse in the fuse compartment on dashboard on the left side from the steering wheel. To acces it you need to pull out the coin holder. Inside you will see the fuses and diagram with tags. Radio was in the second row on the right if I remember correct. Good luck.
Front doors- Inside pannels pop off. Unscrew the plastic pull handle then just start at the bottom and work your way up the sides popping the inside pannel off. with door open unscrew the latch and you will see 2 bolts holding the handle on the inside. Un bolt and replace. Really not much to it but hard to do because the bolts are hard to reach.
remove inside handle + window crank (if not power), screws in armrest, pop of trim from inside this will show you inside of door, pay attentionto direction of linkage connection and it's relationship to the latch mechanism. this link has a funky clever clip holding it to the handle, disconect it from the handle and you should be able to see the fasteners for the handle.