drain the oil, remove engine mount bolts and raise the engine 3-4 inches, remove the starter and block to bell housing brackets. remove the pan mount bolts( you may have to take the tranny lines loose if an automatic) drop the pan.
Is there a spacer on the top of the water pump between the A/C and the pump
The guy that changed the pump on the 98 Chevy Truck helped me on my 97 Dakota.
we have a 99 360 and I paid 130 dollars,rebuilt. we live in Canada
Mine has a 5.8l 360.
.035"
For removing the fuel pump bolts on a 318, 360, 400, you would use a 1/2" socket. I used this to remove and install bolts on a 1977 Dodge Warlock with the 400 in it. Hope that helps.
The answer is...170horse power with a 4-barrel carb
Inside the oil pan.
Failed fuel pump, or a short to ground in the wiring to the pump.
Block and heads are the same, manifolds and sensors are different.
It is inside the tank, part of the fuel pump module.
about $360 at Firestone Car Care