I replaced the main O2 sensor of bank 2 (passenger side) on my 1991 LS400. 1993 model should be similar. If you talk about the sub O2 sensor, located behind the converter, you can use the same way of changing it. First of all, jack up the car and remove the passenger side wheel to have more access to the sensor, which is located on the exhaust pipe before the converter. You need a 22mm box wrench to turn the sensor loose after using plenty of 'liquid wrench' at the base of the sensor. The socket of the sensor is secured on the engine block with a 10mm bolt. You'd better take the bolt off to make it easy to separate the socket and the plug. Installation will be the reverse of what mentioned above. Good luck!
how do you replace a water pump on a 1993 lexus es300?
There are two oxygen sensor, follow the exhaust coming out of the engine. one in the front and one in the back of the engine. if you engine code p0135 bank1 these is oxygen is located between firewall and engine. or p0755 oxygen located in front of the engine
Oxygen SensorOxygen Sensor Location
How is the wire of o2 sensors in a honda del sol 1993?
2
The 1993 oxygen sensor is the best sensor for a 1993 Honda Accord EX.
1992 Lexus es300 wear the thermostat is located
The O2 sensor is located in the exhaust manifold on the front of the engine. To change it you'll need a 7/8 box-end wrench. Just unplug the wire from the harness, unscrew the sensor and replace it. It's pretty easy.
Very hard.
what is the oxygen sensor location on a 1993 oldsmobile cutlass ciera 3.3l v6
M14x1.5
On exhaust manifold.