you take off the bolts holding the toilet to the floor, there is going to be a wax ring , remove and put a new wax ring in between the bolts on the floor and put the toilet back , keep the bolts in sight when putting the toilet back , push toilet down and put bolts back on , flush to make sure no leaks , ,, caulk , . be sure to turn and take off the water supply line before anything , jerermiah
Type your answer here... IN THE TOILET
The wax ring which seals the toilet to the drain is leaking. turn off water, drain tank by flushing. Disconnect water line. remove tank, unbolt toilet from floor. Remove any old wax from toilet and drain. Replace with new wax ring. Reset toilet and press firmly into place.
yes....2 or 3 seals stacked
It seals the gap between the base of the toilet and the toilet mounting flange so that sewage and sewer gases don't escape into the building.
Shut the water supply off to the toilet. Flush the toilet. Pull the old flapper out and replace it with the same type. Turn the water back on and test the toilet.
easily!
Most plumbers would charge 2 hours to replace a complete toilet.
Replace the whole rack, it would take speical tools to replace seals
Where is it leaking ? Flapper in the tank, replace flapper. Between tank and bowl, separate and replace the seal. Toilet to floor. Replace the wax ring under the toilet, making sure it is thick enough to form a seal and the bolts are installed correctly and holding the toilet down.
Replace seals
Transmission seals? front yes, rear no. Engine seals, yes.
It can cost upwards of 200.00 dollars to replace the transmission seals in a 96 Honda Accord as of 2014. The exact price depends on the seals you purchase.