While in park, just punch out the drift pin with an awl and it will pop up-there is a spring inside.
You don't , you replace the linkage cable from shifter to transmission
What do you mean by a stuck shifter? If it doesn't return then the spring is broken, You have to pull the tranny out to replace it. You either have a broken spring or a bent fork or a bent shaft. You need to open it up to see whats wrong
get a new shifter tower from a wreaker
A spring retainer in the shifter breaks. The dealer has a repair package, and some are under a recall.A spring retainer in the shifter breaks. The dealer has a repair package, and some are under a recall.
Yes, a spring is located there. Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
the shifter is all in one. you have to replace the whole shifter. the nob is attached
lightbulb in shifter is blown. remove shifter cover to replace bulb
Professionally, it will cost around $2,000 to replace a broken shifter and clutch in a 96' Chevy Beretta. Just the replacement clutch and shifter will end up costing you around $800.00.
You need the user manual which has steps on how you can replace a shifter knob on a 2002 Dodge RAM 1500 with standard transmission.
You can't. There's a circuit board connected to the shifter with LEDs on it. You have to replace the whole shifter. P/N # 52104149AC
The nylon bushing at the bottom of the shifter is worn out. remove console. put shifter in the neutral position, unbolt shifter from transmission. replace bushing, then reinstall. good luck...