You should find this information in your owners manual. Also you can get a manual for your car at an Auto Zone.
take it to chevy
The tail light bulb on a 1999 Chevy Suburban is replaced by removing the retaining screws, pulling the bulb assembly away from the vehicle, and unscrewing the bulb. A new bulb can then be installed and the assembly screwed back in place.
you don't replace the tail light you just replace the bulb in it
This is because the tail light bulb has a different element in the bulb. Just replace the bulb and that will fix the problem.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
Open the rear hatch there are 2 screws on the inside edge of the tail light remove them then remove the light housing. Unscrew the plug at the back and replace the bulb. Good Luck James
Open trunk. Remove the trunk liner. Remove the nuts holding the tail light assemblies in place. Remove the light assembly. Twist the bulb socket 1/4 turn and pull out. Replace bulb. Reverse procedure tin install.
Replace the light bulb. Tail lights are usually dual filament, 2 filaments in one bulb.
Turn you high beams on and check your tail light. If its brighter, you have a head light bulb as a tail light bulb. 97-02 are the only ones that should do this. Find a tail light bulb and replace.(I couldn't believe it either).
Remove carpet inside trunk that covers tail ligh assembly, then unbolt tail light assembly, remove the assembly and bulb fixture of the bulb you want to replace, replace bulb and re-install in reverse order.
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
Bulb is blown. Replace bulb.