You should find this information in your owners manual. Also you can get a manual for your car at an Auto Zone.
take it to chevy
The tail light bulb on a 1999 Chevy Suburban is replaced by removing the retaining screws, pulling the bulb assembly away from the vehicle, and unscrewing the bulb. A new bulb can then be installed and the assembly screwed back in place.
you don't replace the tail light you just replace the bulb in it
This is because the tail light bulb has a different element in the bulb. Just replace the bulb and that will fix the problem.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
Open the rear hatch there are 2 screws on the inside edge of the tail light remove them then remove the light housing. Unscrew the plug at the back and replace the bulb. Good Luck James
Open trunk. Remove the trunk liner. Remove the nuts holding the tail light assemblies in place. Remove the light assembly. Twist the bulb socket 1/4 turn and pull out. Replace bulb. Reverse procedure tin install.
To replace the tail light bulb on a 2000 Lexus ES300, first, open the trunk and locate the tail light assembly. Remove the access panel or cover to expose the bulb holder. Twist the bulb holder counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb holder, twist it clockwise to secure it, and replace the access panel.
Replace the light bulb. Tail lights are usually dual filament, 2 filaments in one bulb.
To replace the rear tail light bulb on a Mazda MX-3, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it out from the car. Twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble the tail light assembly and test the new bulb to ensure it works.
To replace the tail light bulb on a 2004 Volvo S40, first, open the trunk and locate the tail light assembly. Remove the access panel or cover to reach the back of the tail light. Twist the bulb socket counterclockwise to release it, then pull the old bulb straight out and replace it with a new one. Finally, reinsert the socket and secure everything back in place before testing the new bulb.
Turn you high beams on and check your tail light. If its brighter, you have a head light bulb as a tail light bulb. 97-02 are the only ones that should do this. Find a tail light bulb and replace.(I couldn't believe it either).