Start by removing the battery and the radiator overflow resavore. this way you can get to the waterpump. Now you need to remove the serpentine belt by loosening it at the top of front of motor using a 1/2 inch socket wrench. Next i would remove the pulley to the waterpump. There are bolts under it that need to be removed. Then start removing all the bolts, nuts and the two hex heads that hold the WP on. There are 17 of em. Now you should be able to remove WP.
you must first remove muffler bearing
how do you replace the water pump on Cadillac cts 2004 3.6
How do you replace the water pump on a 1988 Cadillac Seville?
how do you replace the water pump on cadillac cts 2004 3.6
remove top water hose remove four screws frist remove belt from tension spring then need special wrench to turn and pull water pump out
You will notice water leaking out of the water pump specifically around the pulley area.
it is at the driver's side end of the frontmost camshaft right up on top. it is an easy fix but you will need the special tool.
The fuel pump in the older eldos is located inside the gas tank. once you drop the tank its pretty straightforward from there.
There is a separate belt on the opposite side of the motor from the serpentine belt. that belt runs off the camshaft and drives the water pump
No you dont need any special tools to change the water pump you just need to create space around the area because its in a closed in spot and it is alot of screws to take off ..
replace rack and pinion and power steering pump
in the gas tank