The 1998 Nissan Altima has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Below
The 1998 Nissan Altima wiper blade sizes are 21" drivers and 20" passenger side wiper blades. Do not buy by length-only however. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Look at the middle of the wiper blade, where the arm connects and the blade pivots. They way the two are connected is almost like the end of the telephone wire where you plug it into the wall. It will have a little tab you can depress, then while depressing the tab you pull the wiper blade down towards the base of the wiper arm.
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.
== ==
how do you replace shift gear light on a 1998 le altima car?
Be sure you get the right replacement wiper blade. The 1998, 1999, 2000 Volvo s70 takes 21" replacement windshield wiper blades on both sides front.
Be sure you get the right replacement wiper blade. The 1998, 1999, 2000 Volvo s70 takes 21" replacement windshield wiper blades on both sides front.
how do you replace a wiper control module in dodge 1998
Simply replace the wiper. If that doesn't work, the wiper arm may be worn out, and doesn't have enough strength left to hold it against the window.
What about it? Wiper blade??? Just replace with aftermarket. The blade is a wear item and is not covered under a recall and should have been replaced a few times by now on a 12 year old mini van!
Many wiper blades on a 1998 Grand Voyager are held in by a clip. Push the clip towards the arm, and then push the blade back. When the wiper blade is free from the hook, disconnect it from the arm by pushing the wiper down the arm a few inches. It will be free and easy to remove. Now remove the old wiper, and prepare the new wiper. Aim the hook towards the new wiper, it will go over the top. Push the blade towards the end of the arm, until it clicks. Once it clicks, it is in the correct position.