Want this question answered?
... good luck bud, expensive and obsolete.
You can change the ignition cylinder on your 1999 Mercury Mystique by removing the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness.
Begin by removing the belt from your 1999 Mercury Mystique alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Tie wraps can be used to replace a stock radio wiring harness in a 1991 Mercury Tracer. The wires can be replaced with other radio wire from an automotive parts store and the tie wrap can hold them together.
you can get free on line at autozone.com
first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.
This can be caused by a number of things, the most likely being a failure in the oxygen sensor or it's wiring, like a broken or corroded harness.
no
It is possible that the headlight door wiring is degraded to the point of not working. After nearly 50 years, it could be time to replace the wiring harness.
The wiring harness can be removed by unplugging all of the wires. The wiring harness is also held in place by several retaining screws. Remove the retaining screws.
Hey David==Get a new wiring harness from someplac like PAINLESSWIRING.COM and it should have instructions. GoodluckJoe
You should never have to replace the wiring harness, and if you do get a professional to do it. Now if you are talking about the wiring harness for a after market head unit, then you just buy an adapter. AND ALWAYS DISCONNECT THE NEGATIVE BATTERY CABLE WHEN MESSING WITH YOUR CARS ELECTRICAL SYSTEM.