answersLogoWhite

0

first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What size are the speakers in front door of 98 mercury mystique?

5'8


What size are the front speakers in a 2000 mercury mystique?

6 * 8 or smaller there are few speakers in this size. 6 * 9 will not fit.


What size stock speakers come in a 1995 Mercury Mystique?

According to sonicelectronics.com database both front and rear stock speakers are 6"x8"


How do you remove front hub on mercury mystique?

use a slide hammer to remove the hub from the bearing. do this on the car. or remove complete knuckle and press hub out with a press


Where is the kick panel on a 1996 mercury mystique?

On a 1996 Mercury Mystique : There are ( 2 ) kick panels They are the interior trim panels , in front of the front doors , beside the drivers and front passengers feet


Is your Mercury Mystic 2000 front wheel drive?

Yes , the 2000 Mercury Mystique is front wheel drive


Is your 2000 Mercury Mystique front wheel drive?

Yes


Where us the transmission on a mercury mystique located?

The transmission ( or transaxle on your front wheel drive Mercury Mystique ) is in the engine compartment bolted to the engine ( on the drivers side of the engine )


What size are the front speakers of a 93 mercury capri?

6.5 inch round speakers


How many signal flashers on 1998 mercury mystique?

There should be six signal lights on the mystique, two front, to rear, and two sidemarker lights.


How do you remove front speakers for Chevy Equinox?

The Chevrolet equinox front speakers are held in place with two retaining screws. Remove the retaining screws and the wiring harness. The speakers will come out.


How do you remove front strut 98 mystique?

To remove the front strut on a 1998 Mercury Mystique, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel, then disconnect the brake line and any ABS sensor wiring. Next, unbolt the strut from the lower control arm and the top mount located in the engine bay. Finally, carefully pull the strut assembly out of the vehicle for replacement or servicing.