I got a quote for $1300 to replace the bushings on both sides on my 1993 S15. Its very involved to get the control arms off and then the bushings have to be removed and installed with a machine press. It turned out to be cheaper to replace the control arms myself for $250 in parts.
I have 2000 expedition and thought i could change then. After taking my wheel off i notice they could not be change. You need to replace the upper control arm.
You cannot replace just the bushings. You have to replace the whole control arm.
How much does it cost to replace the upper and lower control arm bushings on a 1998 Chevrolet S-10? Upper control arm bushings are quoted at about 1.9 hours fro each side. However, if both are done then 3.5 hours total. Lower control arm bushings are 1.9 hours for one side and 3.4 hours for both sides. Just apply your shop's labor rate to the above hours. Note: Not all mechanics use the same book to estimate time for reapirs. This data is provided by Alldata. Mitchell Brothers could be different, as could the other services. Note 2: Upper control arm bushings are far easier to replace than lower control arm bushings because they are far more readily accessibly.
its the upper control arm bolts also called cam's. most of the time you have to replace the cam bolts and the bushings. that's the best idea for you to idea. rangers are pretty well known for junking those upper control arm bushings.
yes if the unit is not baked
Should be able to, but they have to be pressed out/in. Many places that sell the bushings offer this service.
What is bussin? Bushings? If so, which bushings? Upper Control Arm (A-arm) Bushings? Sway bar bushings -- front or rear? Ya lost me bud, try to be a little more specific and maybe use a spell checker.
Replacing just the bushings is fine unless the control arm is damaged or deformed. There is no real reason to replace the control arm otherwise, unless manufacturer specifications call for it. In those cases, though, you usually won't be able to purchase the bushings separately anyways.
remove control arm and bring it to andres auto parts we press them in for you it will cost you $40 us dollar per arm including bushings 2300 west pico bl los angeles ca 90006 (213)386-8059
Currently it seems like you have no choice but to replace the complete arm, that is all I can find available.
yes if they need it and you can tell if they are fried
Bushings need to be pressed in (and old ones may possibly need to be pressed out) with a special tool, then alignment is required to prevent premature tire wear.