answersLogoWhite

0

Should be able to, but they have to be pressed out/in. Many places that sell the bushings offer this service.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Can you replace the control arm bushings without replacing the control arm?

yes if the unit is not baked


Can I just replace the wheel bearing without replacing the hub?

No, you typically cannot replace the wheel bearing without also replacing the hub, as they are often integrated components.


Can you replace sliding glass doors without replacing the frame?

Yes, it is possible to replace sliding glass doors without replacing the frame by finding doors that fit the existing frame dimensions.


Can you repair a catalytic converter without replacing it?

No, there is no repair if it it clogged. Replace it.


Can you replace o 2 sensors without replacing cat?

Yes, unless the converter is clogged there is no reason to replace it.


Can you replace just the toilet tank?

Yes, it is possible to replace just the toilet tank without replacing the entire toilet.


2002 ford explorer upper balljoint replacement. do you have to replace the upper control arm or can you replace just the balljoint .?

You will need to replace the upper control arm. My research has determined it is not possible to purchase the ball joint seperately. If you do happen to find the ball joint you will have to press the old one out of the control arm which can be a real pain. Autozone has a tool to do it with but I am opting to just change the control arm so the bushing are also new. Moog Part number for the Upper Ball Joint is K80008. This is WITHOUT the control arm. Changing the control may prove to be easier but will most likely be a dealer item.


Can you replace the AC clutch on a 2004 Honda accord without replacing the compressor?

My car is going through the same issue with the A/C. You CAN replace the compressor clutch without replacing the compressor, but the caveat is that you can't tell if the compressor is any good without a clutch. So basically you are gambling that the compressor will still be good by only replacing the clutch. Hope this helps!


Can you replace the differential ring gear without replacing the pinion gear?

No, they are a matched machined set.


Do you need to remove the coil spring to replace the upper control arm bushing on 1990 dodge ram van?

I have a '96 and I know they changed some things, but to my knowledge it's not necessary. I've completely removed my upper control arms without touching the coil springs. The coil spring goes from the lower arm to the frame, and the upper only connects to the steering knuckle.


Why is your 2001 Chevy cavalier shaking while driving at low speeds?

These are the things that I can think of at the moment...Bad tire/rim,wheel bearing,tie-rod end,balljoint,control arm bushing/or loose bolts, rack and pinion bushing,loose lower strut bolts,worn upper strut bushing/loose bolts. What Im trying to say is that its hard to tell without looking at the car itself.


Can you replace the air conditioner compressor clutch on a 2003 jeep liberty without replacing the entire compressor?

It is possible to replace the air conditioner clutch without replacing the entire compressor if you can find somewhere that sells just the clutch assembly and can get the appropriate tool to remove the pulley to get to the clutch. Try buying a repair manual and looking in there.