0
This is the most difficult hinge to replace on that vehicle. The original hinge is welded in place. The replacement hinge bolts in. In order to gain access to the back side of the hinge that is welded to the cab the entire dash assembly needs to be removed. Many times the original hinge can be rebuilt in place with pin and bushing kits and a little welding and drilling of the holes if they are damaged/oblonged. You will need a special tool to r&r the door hinge spring. This tool is available from your local auto parts store for less than $20.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Your Chevy Blazer wobbles at high speeds?
how to change upper tie rod on 96 chevy blazer
How do you fixa code p0507 on 97 Chevy blazer?
Code p0507 2001 chevy s10 replace upper intake, iac, tps still have problem
How do you fix a broken upper hinge driver door1998 blazer?
i replaced mine, just buy a new one and hammer the old one out, have someone help you do it, you position the hinge they move the door in place
Where is the upper intake gasket on a 2001 Chevy blazer?
It is between the upper and lower intake manifold. The gasket is an o-ring type.
Where is the thermostat located on 1998 Chevy Blazer?
Should be in housing at the end of upper radiator hose
How do you find the thermo sate on a Chevy Blazer 2000?
Open the hood, locate upper radiator hose, follow the upper radiator hose from the radiator to the "gooseneck" located on the engine, the thermostat is located under the "gooseneck". The "gooseneck" has to be removed to replace thermostat.
Where is the Fuel Pressure Regulator on the 2002 Chevy blazer?
On the poppet bank under the upper intake manifold.
Where is the oil sending unit on a 2001 Chevy blazer 4x4 with a 4.3 V6?
The oil sending unit on a 2001 Chevy Blazer is just above the oil filter. It is actually located on the diagonal to the oil filter to the upper left.
Where is the fuel injector pressure regulator on a 2001 Chevy blazer?
It is under the upper intake manifold, attached to the bank of poppets.
Where is the thermostat located on a 1996 Chevy Blazer S-10?
Most thermostats are in-line with the upper radiator hose. Check the housing where the upper radiator hose connects to the block.
How do you replace drivers upper door hinge on a 2003 Chevy s-10 pickup?
Very difficult job. All of the hinges are welded in that's one problem. To correctly replace the drivers side upper half, the dash assembly needs to be removed to gain access to the back side of the "A" pillar. I would suggest purchasing a shop manual if you intend on doing that job yourself.
Fuel presure regulator in a 2000 Chevy blazer 5.3l?
Fuel pressure regulator is located under the upper intake cover
