Want this question answered?
how do you reset alarm after rplacing the battery on 1999 toyota solara
Should reset itself when fluid is added unless sensor is bad
There is no reset. Either the fluid is low, or there is a level sensor malfunction.
what is the drive cycle of Toyota solara 2002
Should reset when fluid added--may be defective sensor in reservoir
Make sure odometer (ODO) is slelected (not trip odometer). Hold in odometer "reset" botton. Turn Igniotion to ON but do not start engine. Light will flash and go off. Turn Ignition OFF. Release "reset" button.
Try disconnecting the battery for 5 minutes. If that does not work you will need an OBD2 scanner to reset it. Of course if you do not fix the problem that triggered the check engine light it will just come back on.
Click the link.
You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.
Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
You have to plug a code reader into the OBDII port under your dash. You can borrow them free from many auto supply stores or get them very inexpensively (try eBay). The reader will tell you what the problem is with your ABS system. Once that's repaired the same device will allow you to reset the light. If you reset the light without repairing the problem it'll simply come back on again. Cheers
You have to push the reset button where your mph gauge is.