What light? The malfunction indicator lamp? Also known as check engine light. If it is on then there is a problem. DO not reset it without finding the problem. Otherwise you will be ignoring a problem. These vehicles are designed to tell you when something is wrong with the system.
If you think you want to risk a potentialy serious problem dis connect your negative terminal on the battery for around 5 minutes. The light will be off but if there is a problem it will come back on. Take it to a tech to have then run the scanner on it.
The wrench warming light on the dash of the Ford F250 means that there is a mechanical failure on your vehicle.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
If you mean that you have a warning light on, then once the problem that is causing the airbag warning light to come on is diagnosed and fixed, the light will reset itself.
With an OBD2 scan tool.
The owners manual from my 2010 Ford Edge Limited states that you must drive the vehicle for 2 minutes at over 20 mph before the warning light will reset.
After correcting the cause of the fault the vehicle must be driven above 40kph to reset the ABS warning light.
It means you need to check the engine over, something is wrong.
lights on a f250 a wreanch what does it mean
Engine air filter
there is no fuel pump reset switch on a ford diesel
As far as I know , once the tire is inflated to the correct pressure " range " and you drive the vehicle , after 1 minute the warning will reset itself