Codes are cleared and computers are reset with a scan tool.
The 2003 Dodge Durango OBD 2 port is on lower edge of dash, left of hood release
It's transmission related.
The OBD plug is a sixteen pin connector under the dash on the driver side.
It is under the dash on the driver side.
With an OBD2 scan tool.
OBD 2 scan tool.
You will need access to an OBD scan tool.You will need access to an OBD scan tool.
I have a 1998 dodge stratus and the obd inspection results are showing notcomplete or unsupported. I have been told to drive the car so the computer can reset. What is the drive cycle for this car. I have a 1998 dodge stratus and the obd inspection results are showing notcomplete or unsupported. I have been told to drive the car so the computer can reset. What is the drive cycle for this car.
With a scan tool
The code can only be reset by an OBD II scan tool, available at any auto parts store or local repair shop. many auto parts stores will read the codes for you and reset the light for free, Auto-Zone comes to mind. Of course, what ever is causing the light to come on will set it again in about a day. The cause must be repaired...
OBD 1
Pin 1 is upper left. Pin 16 is lower right. They are numbered in order. OBD-II is a government standard, all the connectors are the same, regardless of make/model. OBD-II is not used by shorting pins together and watching the 'check engine' light flash, you have to use an OBD-II reader, available at your local auto parts store. If this question is in reference to the location of the OBD-II connector jack in the 1999 Dodge Durango, it is located under the drivers side dash, just left of the hood release.