To reset the TSA 306 combination on a Heys suitcase, first ensure the suitcase is unlocked. Then, locate the reset button, often found on the side or inside the lock mechanism. Press and hold the reset button while setting your new combination by turning the dials to your desired numbers. Finally, release the reset button, and your new combination should be set.
hold the trip reset button in for a while and your clock will move, i had the same problem
http://306cab.com/manualroofreset.html this may help you, thanx Lisa
To reset the roof motor on a Peugeot 306 Cabriolet, first, ensure that the vehicle is in a safe position with the ignition turned on. Disconnect the battery for about 10 minutes to reset the system. Reconnect the battery, then operate the roof switch fully open and closed to recalibrate the motor's position. If issues persist, consult the vehicle's manual for further troubleshooting steps.
hold down the trip reset button for about 10 seconds then the minute hand should start moving
To reset the radio on a Peugeot 306, start by turning off the ignition and disconnecting the car battery for a few minutes. Reconnect the battery and turn the ignition back on. If the radio displays a code prompt, enter the security code specific to your vehicle, usually found in the owner's manual or provided by the dealership. If you don't have the code, you may need to consult a Peugeot dealer for assistance.
45% of 306= 45% * 306= 0.45 * 306= 137.7
10% of 306 = 10% * 306 = 0.1 * 306 = 30.6
To reset the immobilizer code on a Peugeot 306 SL after three failed attempts, you'll need to use the vehicle's key and the ignition system. First, insert the key into the ignition and turn it to the 'On' position without starting the engine. Leave it in this position for about 10 minutes until the immobilizer light goes off, then turn the ignition off and back on again. If this doesn’t work, you may need to consult a professional or use diagnostic equipment to reset the immobilizer.
hold down reset trip button for a minute - takes a long time but changes time eventually
Turn ignition off press and hold mileometer reset button. Turn ignition on, Service timer starts countdown to zero, Turn ignition off, release reset button, Turn ignition back on. It should now have reset the service miles. This worked on a 306 try it, it might work on a 406. Hope this is of some help.
306 + 25% = 306*1.25 = 382.5
306/1