When you are displaying the fuel mpg screen hold both buttons down at the same time and they will zero. It only works on the first display after the compass/temp reading so you may have to try a few times to get it .
The dealer and some parts are very reasonably priced
Press and hold the on/off button in the driver information center for 3 seconds. It will convert back to English. YES...it is that easy. I was just on hold for 30 minutes with Oldsmobile to get this question answered. The car should be running, in park. Press and hold on/off button of driver information center for 3 seconds. Do not confuse this with the power button for the radio. Good luck.
What is needed when the ccr is driver information center
Press both buttons on the "driver information center" at the same time. That should reset it for you.
1998, 1999, 2000 are interchangeable as well as the same parts from a Venture and a Montana. Same thing, different vehicle.
It is correct,
There are several things that can cause your 1993 Jeep Grand Cherokee driver information Center not to work. The most common cause is a blown fuse.
the driver info button is on the dash tothe right of the steering wheel
It is called a Flasher Relay. It is located, Front seating area, driver side, driver side of steering column, behind instrument cluster, mounted in convenience center. It simply pulls out.
Press and release the "TEST" button on the Driver Information Center. This will illuminate "CHANGE OIL NOW" if it is not already illuminated. Press and release the "OIL" or "OIL INDEX" button. Next, press the "RESET" button and hold for at least 7 seconds. This information is from www.carstoreusedcars.com.
Read the owner's manual, the procedures vary.
In the center of the driver side airbag on the steering wheel. There will be two small "horn" imprints on the airbag cover. This car was the Olds clone of the Pontiac Grand Am.