If you have set the alarm system off, lock the driver door, and then unlock it with the key and that should reset the security system.
Turn the key in the drivers side door lock to the locked and then unlocked position. This should clear the alarm and reset it.
close the bonnet and then lock the doors
Use the remote door lock to lock the doors, then unlock, then lock. The alarm should be reset. If not get in the vehicle, lock all the doors with them closed, unlock them, relock them walla alarm reset!
how do i activate the alarm system on a 2001 bmw 330 ci
if you have a factory alarm..you will need a power remote to reset the alarm. or you can reset the alarm be using the key in any of the door locks or in the rear hatch lock . just cycle the key to the unlock position to shut alarm off. to reset alarm to armed use the door lock power switch to lock the door then shut door and alarm will reset to on .
I used the remote to lock/unlock the doors and it reset the anti-theft on a 1997 Dodge Intrepid.
Use the door key to cycle the driver's door through a couple of lock and unlock sequences. This should reset the alarm.
To reset the alarm on a Volvo S90 you will need the key alarm. Press the lock button on the key alarm. Next press the large button the key alarm. The flashes that you see on the LED is confirmation that the alarm has been reset.
To reset a 2001 Trooper alarm system, place the key in the driver's side door and lock and unlock it. You can also place the key in the ignition and turn it slightly. Let it sit in that position for 10 minutes before starting the car.
There is no reset button. The alarm is disarmed by using the remote or turning the key in the door lock.
The OEM factory alarm systems have a procedure that is used to reset the alarm. To do so, turn the key to on position and press the lock/unlock button. Do this three times in five seconds and the alarm with be in program mode. Here the alarm can be reset.