answersLogoWhite

0


Best Answer

If it is a double sink, does the other side drain? Are you trying to fix the disposal because it does not come on or because it comes on but does not drain. If it comes on but does not drain and the other side does, it is probably just clogged with food. They make drain cleaners for disposals. If neither side drains, put the stopper in the disposal side, hold down on it and plunge the other side.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

Garbage disposal? If it is just jammed, you can use a hex wrench on the bottom of the unit to try and free it. If this doesn't work, you can use a broom handle through the sink to unjam it. If it has quit working but not jammed, there is really no way to fix it. It just needs to be replaced.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

To reset your garbage disposal, open up the cupboard underneath your sink and find the disposal unit (its attached to the sink). Right on the bottom of the disposal is a red button, push the red button and this will reset your disposal. Make sure there is nothing blocking the blades from moving though as that could prevent them from spinning as well.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

By shutting off the electrical power and then disconnecting the flange

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you fix the garbage disposal when the water does not drain?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can onion skins go down the garbage disposal?

According to most sink manufacturer's, NOTHING should be pt down a drain (except water) unless you have a garbage disposal.


How can you fix a dishwasher that has garbage disposal water in it?

Make sure the drain hose has a loop tall as the dishwasher under the sink. This will stop the water from going back in the dishwasher.


What's wrong if your kitchen water stinks and how do you remedy this?

Is it the water that stinks coming out of the faucet or the drain that stinks? If it is the garbage disposal put in some baking soda and start it up and then toss in some orange rinds that should fix it. If it is the water coming out of the faucet contact the city water or if you are on a well or spring have it tested.


How can one fix a garbage disposal?

Your options for repairing your disposal include reaching down and pulling out the rock or hiring someone to come look at it and fix or replace as necessary. Disposals run around $50.


How do you fix a garbage disposal with standing water?

If your garbage disposal is not draining and there's standing water in the sink, there are a few steps you can take to troubleshoot and potentially fix the issue. Here's a guide to help you: Before You Begin: Safety First: Ensure the garbage disposal is turned off and unplugged before attempting any repairs or troubleshooting. Identify the Cause: Understand why the disposal is clogged or not draining. Common causes include food particles, grease, or foreign objects. Steps to Fix a Garbage Disposal with Standing Water: Turn Off the Power: Make sure the garbage disposal is switched off. For added safety, unplug the disposal or turn off the circuit breaker that supplies power to it. Check for Foreign Objects: Use a flashlight to look into the disposal chamber. Check for any foreign objects, such as utensils or large pieces of food, that might be causing the blockage. If you find any objects, use tongs or pliers to carefully remove them. Use the Reset Button: Many garbage disposals have a reset button. Locate the reset button on the bottom of the disposal unit and press it. This can help if the disposal has tripped due to overloading. Use a Plunger: Fill the sink with a few inches of water. Place a plunger over the drain and push down firmly, then pull up quickly. Repeat several times. This can help dislodge the clog. Use a Hex Wrench: Some disposals have a hex-shaped hole at the bottom. Insert an Allen wrench into the hole and turn it clockwise and counterclockwise. This can help manually free up the disposal blades. Rotate the Blades: Use a wooden or plastic tool to rotate the blades inside the disposal. This can help break up any material causing the blockage. Check the Drain Pipe: Disconnect the drain pipe from the disposal and check for clogs or obstructions. Clear any debris you find. Run Cold Water: Turn on cold water and run it while turning on the disposal. The flowing water can help flush out any remaining debris. Use Baking Soda and Vinegar: Pour a cup of baking soda and a cup of vinegar into the disposal. Let it sit for a few minutes, then flush it with hot water. This can help break down grease and eliminate odors. Call a Professional: If the above steps do not resolve the issue, or if you are uncomfortable performing these tasks, it may be time to call a professional plumber to assess and fix the problem.


Do it Yourself Garbage Disposal Repair?

One of the most common problems encountered with a garbage disposal occurs when you try to turn the disposal on, but nothing happens. If you are experiencing this issue, there are several things you can try to fix the garbage disposal yourself before you go through the trouble of calling a professional repairman or replacing the disposal completely. Before you try anything, however, always remember that you should never put your hand down the drain and into the disposal as this is extremely dangerous. If your garbage disposal makes absolutely no noise when it is turned on, this signals that the problem is electrical in nature. The first thing you should do is verify that the garbage disposal is connected to the power source. Obviously, if the disposal isn't plugged in, it will not run. If you find that the disposal is properly connected to power, try pressing the Reset button typically located on the bottom of the disposal unit. In the event that pressing Reset doesn't work, the next thing you can do is check the circuit breaker to see if it has been turned off or tripped. If it has been tripped, simply turn it back on. If you have checked the power, reset the unit, and checked the circuit breaker and your disposal still refuses to make a sound, there is either something wrong with the switch or the disposal may need to be replaced. To check the switch, you must first locate it. It may be on the wall near the disposal or under the sink. Once you have located the switch, you can replace it to see if that solves the problem. Before you replace the switch, however, you must disable the circuit breaker that powers the garbage disposal. After you have replaced the switch, you should turn the circuit breaker back on and check to see if your garbage disposal is working. If the switch was faulty, the garbage disposal should run normally. In the event that none of the suggestions detailed above are successful, it is likely that your garbage disposal cannot be repaired and you will need to replace it. You can either do this yourself or call a professional to install the new disposal.


If water is dark and murky must you drain the pool to fix it?

no


How do you fix a sink with a disposal clogged with a bag of flour?

Disconnect the power to the disposal, and VERIFY THAT THE POWER TO THE DISPOSAL IS OFF! If possible, LOCK the panel which contains this breaker or fuse, and TAG it with a WARNING tag to prevent the accidental re-energizing of the circuit. Then, remove the flour from the disposal. Once most of the flour is removed from the drain, what's left may 'flush' down the drain with a flow of water. If this proves not to be the case, the trap under the sink may need to be removed to facilitate clearing the clog. Once cleared, the drain should run freely. Once all is reassembled and running freely, the disposal can be put back into commission by unlocking the panel and turning on the power.


How do I fix the evaporator drain plug leak in a 2005 Scion xA?

The evaporator drain is suppose to drain off the condensation (water). If you plug the drain the water will end up inside the cabin on the floor.


How To Unblock A Clogged Garbage Disposal ?

Instead of calling the plumber the next time your garbage disposal clogs, try to fix the problem yourself. First, unplug the garbage disposal. Then, use a broom handle to manually rotate the blades. The broom handle gives you enough leverage to turn the blades even if there is a clog. Once the blades turn freely, remove the material that caused the clog. Only use your hand if you are sure that the power is completely disconnected. Once the clog is removed, plug the disposal back in, press the reset button, and turn it on. The unit should now work properly.


Repairing a Fussy Garbage Disposal?

A garbage disposal is a convenient tool for virtually any kitchen, and once the appliance is in use every day, it is hard to do without one. There are a few things that can cause a garbage disposal to go on the fritz and some of them can actually be fixed without calling in a professional.No NoiseIf the disposal has stopped making any noise when it has been turned on, there are some things that can be checked.1. Look under the sink, at the bottom of the garbage disposal, and try to press the unit's reset button. Sometimes it is as simple as the reset button popping out. Push it back in and give the disposal another try.2. Check the circuit breaker. If it has been tripped, switch it off and back on, then try the disposal again.3. Find the switch that powers the garbage disposal. This is usually located on the wall near the sink or in the cabinet underneath the sink. It may be a case of a malfunctioning switch. Turn off the circuit breaker the powers the disposal, then replace the faulty switch. Try the disposal once again. If this is an uncomfortable situation, it might be worth it to have a professional fix it.4. If nothing else is fixing the problem and the disposal still makes no noise when turned on, it might need to be replaced completely. A bit of do-it-yourself knowledge is required for this sort of replacement, so a professional might be needed.Strange NoisesIf the disposal unit is making odd or humming noises but will not actually run, it might be clogged or stuck on something.1. Switch the circuit breaker that powers the disposal off.2. Most garbage disposals come with an offset wrench. Insert this wrench into the flywheel turning hole - this is situated on the bottom of the garbage disposal. Going in a clockwise direction, turn the wrench. This will dislodge anything that has gotten stuck. The flywheel will turn freely when it has been cleared.3. Never put a hand down the garbage disposal. Using a wooden broom handle, the disposal's impeller can be easily unclogged or unstuck from the sink drain. Place the end of the handle against the impeller and, using a bit of elbow grease, try to free it. When it is not obstructed any longer, remove the handle and push the reset button underneath the unit.4. Turn the water on in the sink and quickly switch the disposal off and on for a few seconds. This will make the flywheel spin and can help to dislodge anything clogging it.


What is the best way to fix clogged drains?

If your bathtub or shower drain is clogged, chances are it's clogged with hair and almost any drain cleaner sold in stores will dissolve a hair blockage. Follow instructions on the bottle. If it's your kitchen drain, there are products to clean garbage disposals that will dissolve most food products. Again follow directions on the bottle and use hot water.