You must do all of this within 5 seconds. Turn key on DO NOT START then push the gas pedal all the way to the floor 3 times then turn key off and then start the engine.
how do you reset change the oil light in a 2004 alero?
Clear all PCM codes.
Disconet the battery for 15 minutes this will reset your oil change light
To reset the engine light on a 2004 Chevy Tahoe, you can use an OBD-II scanner to read and clear any trouble codes. Alternatively, you can disconnect the battery by removing the negative terminal for about 15 minutes, then reconnect it. This may reset the engine light, but it’s important to address any underlying issues that caused the light to illuminate in the first place. Always consult a mechanic if you're unsure about the cause of the warning light.
To reset the oil change light on a 2004 BMW 330ci, turn on the ignition without starting the engine. Press the gas pedal fully three times within five seconds. Then, turn off the ignition. When you restart the vehicle, the oil change light should be reset.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
It is reset with the radio controls, Listed in your owner's manual.
To reset the oil change light, hold down the odometer and clock buttons for a few seconds. (with the ignition turned on).
The air bag warning light can be reset by fixing the issue that caused it to go off. It can also be reset by disconnecting the battery for 10+ minutes, or using an OBD scanner to clear any codes.
How to reset service light on a 2004 grand am
Start the car push the trip button until you get to engine oil and select reset and you are done.
Try turn the ignition key to "on" position without starting engine and depress accelerator to the floor 6 times