Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
twist and pull out
Try turning the key to "on" position without engine running and push accelerator to the floor 6 times
Yes it can.
How do you replace a break light switch on 1995 Chevy Tahoe
To reset the oil change light on a 2007 Chevy Tahoe, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing so, the oil change light should turn off, indicating that the reset was successful. If the light remains on, repeat the process.
You will have to take the dash apart and replace the bulb.
To reset the check engine light on a Chevy Tahoe, you can disconnect the negative battery terminal for about 10-15 minutes, which will clear the system's memory. Alternatively, you can use an OBD-II scanner to read the trouble codes and clear them, resetting the light. However, it’s important to address the underlying issue that triggered the check engine light before resetting it to avoid reoccurrence.
Write the date and mileage on a small sticker and cover the light with it.
Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
THE EASIEST WAY TO DO IT YOURSELF IS TO UNHOOK THE BATTERY. iF YOU DO HAVE A PROBLEM THOUGH, THE LIGHT WILL COME BACK ON.
It means there is a problem in the emission system are transmission. Need to have engine scaned with a engine scanner. Some parts stores will do that for free.
More the likely the alternator has quite working are the belt / belts have broken on the front of the engine.