Depends on what make, model, and year you fail to list.
Hi, Isn't there a black button all the way on the right on the dash information center which says OIL CHANGE RESET? --- Not on a Gen 2 (97-98) Mark. You need to go to the "Oil Change Reset" option by pressing the "Vehicle Settings" button, then hold down the RESET button for five seconds. The Information Display will count down while you hold it.
Hi,1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button (on the dash) until OIL is displayed on the Driver Information Center.2. When OIL is displayed, push and hold the trip/reset button for 5-10 seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).3. Turn the key to OFF.If the change engine oil message comes back on, the engine oil life monitor has not reset. Try repeating the procedure.
hi how to change supercharg oil nissan xterra 2002
hi there you can reset the oil light by turning the key on and engine off, and fully press the gas pedal 3 times in 5 seconds then start the truck and the oil light should flash, if it dont work try it all over again or look in your owners manual under reset oil light. instead of turning on ignition and pressing gas pedal three times try turning on ignition and pressing the brake pedal three times it worked on my 2001 silverado !
hi oil change for your pug should only cost you about £45
Hi there is a 24mm bolt on the gearbox on the under side. And then put the new oil in by the dip stick.
hi ive been told that mine is 7 lt for a total oil and filter change
hi jonny this is kyle whats up this packet is boring
tu hi haqeeqat
Hi I have cruiser 2008 gxr how is reset t.belt light
Hi there. The Haynes Manual specifies 3.0 Litres, or 3.1 if you're doing a oil filter change. :) Moog
A mile or so