you turn the key to on position hold the select and reset buttons for 10 seconds and it should go off
i have an acura cl 2001 what does the ! light on thr dashboard mean
A 2001 Intrepid does not have an oil change light.
Turn key to position 2 and hold select and reset together for 10 secounds
The car actually measures the viscosity of the oil while you are driving and running the car when you change the oil the light will be reset.
go to www.kofla.net
2001 doesn't have a reset for the oil, the oil pump might be going out though.
To reset the SRS light on a 2001 Acura, first, ensure the ignition is off and disconnect the negative battery cable for at least 10 minutes. Then, reconnect the battery cable and turn the ignition to the "On" position without starting the engine. Press the SRS reset button, usually located under the driver's side dashboard, until the light turns off. If the light remains on, it may indicate a deeper issue that requires professional diagnosis.
The oil change light in your car is there to remind you to change your oil in a timely manner. if you do not reset your oil change light, it just wont remind you to change your oil. :)
Push the select and reset switch at the same time, turn the ignition switch ON (II), and hold them more then 10 seconds. The above sentence came straight from the 2001 Acura TL service manual
To reset the SRS (Supplemental Restraint System) light on a 2001 Acura CL S Type, you typically need to use a diagnostic tool to clear any fault codes stored in the system. Alternatively, you can disconnect the car battery for about 10-15 minutes, then reconnect it, which may reset the light. However, it's essential to ensure there are no underlying issues with the airbag system before resetting the light. If the light persists, consult a professional mechanic for a thorough diagnosis.
how to use bcm to reset change oil light
To reset Maintenance light, switch key to on position, do not start. Press select and reset buttons at same time for about 15 to 20 seconds, then switch key off. If reset occured, the light will go off when you restart engine. If not, repeat process. Took three time for me.