To reset the SRS light on a 2001 Acura, first, ensure the ignition is off and disconnect the negative battery cable for at least 10 minutes. Then, reconnect the battery cable and turn the ignition to the "On" position without starting the engine. Press the SRS reset button, usually located under the driver's side dashboard, until the light turns off. If the light remains on, it may indicate a deeper issue that requires professional diagnosis.
SRS (Supplemental Restraint System) You have a problem with the air bags. You have to get the problem repair by a professional and they will reset the light.
(Supplemental Restraint System) SRS light is on because there is a problem with the system. Fix the problem and the light will reset itself. As long as that light is on the SRS will not function if needed.
SRS sensor lights have a warranty extention. There is a factory problem with the SRS light coming on. Call your dealer. Your car has to have under 150,000 miles on it.
airbag light is on dash
To reset the SRS (Supplemental Restraint System) light on a 2001 Acura CL S Type, you typically need to use a diagnostic tool to clear any fault codes stored in the system. Alternatively, you can disconnect the car battery for about 10-15 minutes, then reconnect it, which may reset the light. However, it's essential to ensure there are no underlying issues with the airbag system before resetting the light. If the light persists, consult a professional mechanic for a thorough diagnosis.
The light is on because there is a problem. Bring it in and get it looked at. That SRS could save your life someday.
Resetting the SRS light on a 1999 Acura CL requires that you locate the SRS fuse. This fuse is located in the under-hood fuse box and is labeled SRS. Once you locate the fuse you will need to remove it for thirty seconds and then reinstall it. This process will reset the SRS light. To ensure that the light does not come back on you should also inspect the wiring and connections for the SRS system. In order to complete the reset process you will need to do the following steps: Locate the SRS fuse in the under-hood fuse box. Remove the fuse for thirty seconds. Reinstall the fuse. Inspect the wiring and connections for the SRS system.Once you have completed the above steps the SRS light should be reset and you should be able to drive your 1999 Acura CL without any issues. However if the light continues to come on you may need to take your vehicle to a qualified mechanic to diagnose and repair the problem.
Disconnect the battery, wait 2 minutes and reconnect the battery. All fault codes must be cleared from the SRS control moduleâ??s memory in order to reset the SRS indicator light. All of the underlying problem must be fixed to prevent the SRS indicator light from illuminating again.
Have the SRS problem repaired by a professional and he will reset the light. This is not a DIY repair. Working on the air bags can be dangerous. Take it to a pro.
To reset the SRS (Supplemental Restraint System) light on a 2001 Acura MDX, first ensure that the vehicle is in the "Off" position. Then, turn the ignition key to the "On" position (without starting the engine) and wait for the SRS light to illuminate and then turn off. After that, turn the ignition back to "Off" and repeat this process two more times. If the light remains on, it may indicate a persistent issue that requires diagnostic tools to identify and resolve.
The SRS light ( Supplemental Restraint System light ) indicates that a problem has been detected with the air bags , if the light stays on or flashes . You need to take it to a professional
how to reset a srs warning light on 307 203 model