with the key lock and unlosk the front doors or the lift gate on the rear.
The factory alarm is reset by unlocking the doors with a key or remote.
if you have a factory alarm..you will need a power remote to reset the alarm. or you can reset the alarm be using the key in any of the door locks or in the rear hatch lock . just cycle the key to the unlock position to shut alarm off. to reset alarm to armed use the door lock power switch to lock the door then shut door and alarm will reset to on .
To reset the alarm on a Corolla 1993, place they key in the ignition and turn it until it clicks. Keep the key in this position for 10 minutes and then start the car as normal.
Put the key in the door and then lock and unlock it.
Unhook your positive battery terminal for 5 minutes. Then use key in passenger side door (after you reconnect battery) turn left/right 2 times this should reset your factory settings.
disconnect and reconnect the battery
on my 1993 jeep GCL i removed fuse 6 and 7 from the fuse box to disable my alarm i hope this helps
Either reset with a scan tool, or by unhooking the battery.
Contact the dealer.
usually the factory alarm
Look in your owner's manual. put the key in the door
Use the key to unlock the driver side door. This will reset the alarm and the starter cutoff. i took the modul that chimes for doors out and mine stop the alarm.