0
What else can I help you with?
Reset oil light on 2002 Pontiac firebird?
Turn the ignition on in the car and hold down the trip reset button on the dash for about 10 seconds, the change oil light may blink a few times but then go out. All done!
How do you reset the security light on a 94 Pontiac Firebird?
take off the negative cable for 10 sec. or so, that should clear all the codes and reset the computer.
How do you reset the security light on a 91 Pontiac Firebird?
To reset the security light on a 1991 Pontiac Firebird, first, ensure that the vehicle is in the "Run" position without starting the engine. Then, turn the ignition off and back to "Run" three times in quick succession. After the third cycle, leave the ignition in "Run" for a few seconds, then turn it off again. This should reset the security system and turn off the security light.
How can you reset the security light on a 01 Pontiac firebird?
To reset the security light on a 2001 Pontiac Firebird, first ensure that you have the correct key that corresponds to your vehicle's security system. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "Off" position and back to "On" again. This should reset the security system and turn off the light.
How do you reset the security system on a a 1995 Pontiac firebird?
To reset the security system on a 1995 Pontiac Firebird, first, ensure that the vehicle is in the "Off" position. Then, turn the ignition key to the "On" position without starting the engine, and leave it there for about 10 minutes. After this period, turn the key back to the "Off" position and then attempt to start the engine. If the security light goes off, the system should be reset.
How do you reset the change oil light on a 2000 Pontiac firebird?
Most of the newer GM cars are set up so that it's fairly easy. Turn the key on. Push the accelerator pedal all the way down and release 3 times. It should now be reset.
How to reset the change oil soon light on a Pontiac Aztek?
Read you owner's manual.
how do you reset the security light on a 95 Pontiac firebird?
To reset the security light on a 1995 Pontiac Firebird, turn the ignition key to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off. Afterward, turn the key back to the "Off" position, wait a few seconds, and then start the engine as usual. If the light persists, you may need to check for issues with the vehicle's security system or key.
Where is the fuel emission module reset switch located on your 1989 Pontiac firebird?
No such thing never was
How do you reset oil change light Pontiac solstice?
To reset the oil change light on a Pontiac Solstice, turn the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, the oil change light should reset and turn off. If it doesn’t reset, repeat the process or consult the owner’s manual for further instructions.
How do you reset the check engine light after an oil change on a 2004 Pontiac Vibe?
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
How do you reset the change oil light on Pontiac Montana 2006?
To reset the change oil light on a 2006 Pontiac Montana, first turn the ignition key to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. Finally, turn the ignition off and then back on to verify that the oil change light has been reset. If the light remains on, repeat the process.
