To reset the security light on a 2001 Pontiac Firebird, first ensure that you have the correct key that corresponds to your vehicle's security system. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "Off" position and back to "On" again. This should reset the security system and turn off the light.
take off the negative cable for 10 sec. or so, that should clear all the codes and reset the computer.
To reset the security system on a 1995 Pontiac Firebird, first, ensure that the vehicle is in the "Off" position. Then, turn the ignition key to the "On" position without starting the engine, and leave it there for about 10 minutes. After this period, turn the key back to the "Off" position and then attempt to start the engine. If the security light goes off, the system should be reset.
Hold the oil/trip Reset button while ignition is on (not car) for 8 seconds
how i can reset the security sistem for a Pontiac 2001 grand am
How do you reset the security code on a 1994 ponitac firebird formula......
Turn the ignition on in the car and hold down the trip reset button on the dash for about 10 seconds, the change oil light may blink a few times but then go out. All done!
No such thing never was
To reset the flashing security light in a 2001 Pontiac Bonneville SSEI, first, ensure that the vehicle is in the "Run" position without starting the engine. Then, leave the ignition on for about 10 minutes until the security light stops flashing. After that, turn the ignition off for 5 seconds and then start the vehicle. If the light continues to flash, you may need to check the key or the security system for further issues.
There is no "reset" switch, that I know of. Everything on that car, programs either through the radio, or, with a Tech 2, through the OBD2.
To reset the security code on a 2001 Pontiac Aztec, first, ensure that the vehicle is in the "Run" position without starting the engine. Then, disconnect the vehicle's battery for about 10 minutes to reset the system. Reconnect the battery, and the security light should turn off after a few minutes, indicating the system has been reset. If issues persist, consult the owner's manual or a professional for further assistance.
how do i restate my security system in my 2000 Bonneville
To reset the security code on a 2002 Pontiac Aztek, first, disconnect the vehicle's battery for about 10 minutes to reset the system. Reconnect the battery, then turn the ignition to the "On" position without starting the engine. Wait for about 10 minutes until the security light turns off, then turn off the ignition and restart the vehicle. If you have the original key, it may also help to use it to start the engine after the reset.