how do you reset change the oil light in a 2004 alero?
I have a 2002 alero how do you reset, the coolant light is always on. Thanks, Alero owner
When your security light comes on and your car will not start, turn you key to the on position and wait 10 minutes. The light will go off and you need to turn the key to the off position, then restart your car.
You can't bypass or reset security system, bring it to the dealer.
Turn the key to "on" and let it sit for approx 10 minutes until the 'security' light stops flashing. Turn to off and start as normal.
Should reset itself when fluid is added unless sensor is bad
It probably won't start
always on nomatter what i do
You don't. Just and fluid and it will go off.
turn off engine, and start again
have vehicle scanned to determine the problem
After changing the engine oil, you must reset the system. To reset the system, you must do the following: 1. With the ignition key to ON, push the RESET button located in the driver's side instrument panel fuse block. 2. When the CHANGE OIL light starts to flash, press and hold the RESET button again. The reset is complete when you hear the chimes sound and the CHANGE OIL light goes out. I can e-mail you the manual for the Alero 2001 for 14.95 us forward your payment to paypal send to : ray_rayon@hotmail.com use paypal If you want the Alero use manual on CD then 29.95us