This light has to be reset by the person doing the oil change. It is not automatic when the oil is changed.
After the oil has been changed, hit your status button. When the oil change comes up hit the reset button.
rest change oil indicator on the dash after you have changed the oil
no you wait till you it changed
Turn your ingnition switch on and pump the gas pedal 3 times. Then turn off your ingnition switch wait about 3 seconds then go ahead and start it.
The "change oil light" doesn't run off of the quality/quantity of the oil; it runs off of the odometer and the "memory" of the last time the "change oil light" was reset. In other words, if you changed the oil at 3,500 miles and reset the light at that time, the light will automatically come on at 7,000 miles as a reminder to change the oil. You can reset the light yourself in about 5 seconds. The "change oil light" doesn't run off of the quality/quantity of your oil. It runs off of a pre-determined distance from the last time the light was reset - presumably, the last time the oil was changed. For instance, if you change your oil at 3,500 miles, and the light is set to go off every 3,500 miles, then it will again go off at 7,000 miles, regardless of whether you re-changed the oil. Its just a reminder device. You can also reset the light yourself in about 5 seconds.
Reset the change oil light on Mazda 3
After oil has been changed! Set info to oil life, then hold the reset button (info reset)until it displays 100%. That's it!
It tells you in the manual, but if i remember correctly you turn the key but dont start the truck. then push the gas pedal to the floor 3 times and it will chime if it reset.
Your owners manual should tell you how to reset the light.
how do you reset change the oil light in a 2004 alero?
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.