You take it to the dealership
turn your ignition switch off and then on in rapid sucession four times dash lights will blink and code can be reset
To unlock a door, you typically need a key or a code. Insert the key into the lock and turn it to the right to unlock the door. If it's a keypad lock, enter the correct code to unlock the door.
To reset the garage door code, locate the reset button on the garage door opener unit. Press and hold the reset button until the indicator light blinks. Then, enter a new code on the keypad and press the enter button. The garage door code should now be reset.
To unlock a door, you typically use a key or a code to disengage the locking mechanism, allowing the door to be opened.
the only way we have found to reset the security was too lock the driver door, then using your key, unlock the driver door. repeat as ness. the only way we have found to reset the security was too lock the driver door, then using your key, unlock the driver door. repeat as ness.
You unlock the door with the key or with the remote.
To unlock a garage door, you can typically use a key or a keypad code, depending on the type of lock system installed. Insert the key into the lock or enter the code on the keypad to unlock the door and gain access to the garage.
Not sure there is a way to reset. It may be a lock solenoid or a bad wire
Use the door key to cycle the driver's door through a couple of lock and unlock sequences. This should reset the alarm.
Unlock the car with the remote or the key in the door.Unlock the car with the remote or the key in the door.
Put the key in the door and unlock it.
Unlock the door with the key or the remote.