0
I had the same problem, and since the manuel is no help, I had to figure it out myself. So here's what worked for me. With the engine on... Push the Setup button, until your driver display says something like "Press Reset for system check". Then push Reset. The system check will start, rotating through a series of checks. About the fifth or sixth check will be the tire pressure. The system will sound the tone (same that when just that light came up) and It'll say something like "Check Tires Pressure" on that moment press and hold for 3 or 4 seconds Reset. When you release the Reset button It'll show "Hold Reset if tires are OK". While that's up, hold the Reset button. After 3 or 4 seconds, the tire warning light will blinck 2 or 3 times and then will click off. You need to be ready for it, because you don't get very long. Sorry if I don't have the prompts exactly right. I remembered them the best I could. This will also work for Mercury Monterey. Good Luck!!! Craig
How to reset the low tire pressure warning if the vehicle does not have the "Message Center"
* turn the ignition to the ON position,
* depress and Trip/odometer button (located in the instrument cluster) until "TIRE RESET" or "CHECK TIRE AND RESET" is displayed in the odometer display window.
* Once "TIRE RESET" or "CHECK TIRE AND RESET" is displayed, press and hold the button for three seconds.
The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.
This information is detailed and illustrated in the Owners Manual - See "Related Questions" below
What else can I help you with?
How do you reset engine light in Ford Freestar 2004?
Remove battery cable, reattach first step.
How do you reset abs light on 2004 Ford Freestar?
To reset the ABS light on a 2004 Ford Freestar, first, use an OBD-II scanner to check for any stored trouble codes and address the underlying issue. After fixing the problem, you can reset the ABS light by disconnecting the negative battery terminal for about 10-15 minutes. Reconnect the terminal, and the light should turn off. If the light remains on, further diagnostics may be needed.
How do you reset the abs light on 2004 Ford Freestar?
It is on because there is a problem with the abs system. Fix the problem and the abs light will reset itself. Have your local auto parts store read the codes for you.
How do you reset tire pressure on a 2004 Pontiac grand prix?
how do you reset the tire pressure warning light on a 2004 pontiac grand prix
Where is the reset button for airbags on a 2004 ford freestar?
sorry , I don't believe there is one i called ford service center and was informed there is no reset button for ford freestar 2004. either i had to order a new airbag system or get to module computer a bypass to reset computer.
What is the ideal tire pressure for a 2004 Ford Freestar?
35 lbs
Where is the reset button on a 2004 Ford Freestar?
Well, honey, the reset button on a 2004 Ford Freestar is located on the dashboard near the driver's side door. It's typically used to reset the tire pressure monitoring system or the oil change light. Just give it a good poke and you'll be good to go, sweetie.
How do you reset tire pressure warning light on 2004 highlander that has no reset button?
I found a reset button under the dash board. You may want to look there first.
How do you reset the check engine light on a 2004 Ford Freestar?
You should ensure that you have had any needed repairs done to your vehicle when the check engine light comes on. If you have an ODB reader and already performed the repairs, you can use it to reset the check engine light, otherwise it can take time after a series of cold starts, and a mix of city and highway driving for the system to reset itself.
Why is 2004 Ford Freestar blinking check engine light?
Usually a misfire.
How do you reset the change oil light in 2004 alero?
how do you reset change the oil light in a 2004 alero?
How do i reset the security on my 2004 Ford Freestar?
To reset the security system on your 2004 Ford Freestar, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off. Turn the key back to the "Off" position for a few seconds, then try starting the vehicle. If issues persist, consult your owner's manual or a professional for further assistance.
