0
Turn key to position 1. Make sure main odometer and trip odometer are displayed. Press up or down arrows on steering wheel to show FSS (flex service) on display. Turn key to on position and press trip odometer reset (R) for 2 seconds. Display will ask if you want to reset FSS. Confirm by holding reset until display shows FSS reset.
What else can I help you with?
How do you reset the oil gauge on a 1999 Chrysler Town and Country?
The oil gauge does not have a reset. Is malfunctioning, the sending unit has probably failed.
How do you reset the maintenance light on a 1999 Tacoma?
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
How do you reset maintenance light on 1999 acura t l 3.2?
How to reset maintenace light on 1999 acura t l 3.2
How do you reset maintenance service light on 1999 infinity G20?
Check out G20.net
How do you reset a maintenance light on a 1999 Nissan altima?
Resetting the maintenance light on a 1999 Nissan Altima requires access to the engine compartment of the vehicle. Once their locate the battery and disconnect the negative cable for 5 seconds. Doing so will allow the system to reset.
How do you reset maintain require light on 1999 acura integra?
To reset the maintenance required light on a 1999 Acura Integra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The maintenance light should turn off, indicating that the reset was successful. If it doesn't reset, repeat the process to ensure it's done correctly.
How do you reset the 'maintenance light' on a 1999 Toyota Sienna?
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
How do you turn off maintenance light on a 1999 Honda Accord?
In order to turn the light off, you need to have the car either in the lock or off position. Hold your trip gauge down (the button you use to reset your mileage) then start your car, still holding the button in.
How do you reset the gauge cluster on 1999 dodge neon?
Turn the car to the on position. Hit trip reset button until it say trip. Now turn the key to off. Hold the trip button and turn to on. Release trip button after the needles reset.
How do you turn off the maintenance required light on a 1999 Honda Accord Sedan?
To reset the MAINTENANCE REQUIRED light:- Have key inserted in ignition but in the OFF or LOCKED position.- Push and hold the trip reset button on the right bottom corner of your gauge clutster. (this is the same button that you use to reset your mileage counter)- Turn key to full ON position and continue holding the button till the light goes off. (at least 10 seconds) The above is true for Honda accord models upto 2001 and possibly for newer ones too.
Is there a reset button on a 1999 Dodge Durango?
No, a 1999 Dodge does not have a reset button.
Is there a reset button on a 1999 Dodge Intrepid?
No. A 1999 Dodge does not have a reset switch.
