Takes a code reader to plug in under dash.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
That requires a scan tool.
What warning light? The only warning lights that can be reset are the Maintenance Required and Check Engine Light. The Maintenance Required light is reset in different ways depending on model and year. The procedure is listed in your owner's manual. Reset the light after performing scheduled maintenance listed in your owner's manual, usually oil/filter change. The Check Engine light is reset by repairing the problem then unhooking the battery for 15 minutes, on a pre-1996 vehicle. On a 1996 and later vehicle it normally requires you use an OBD2 scan tool to reset the light. If you do not repair the problem that set the fault code, the light will just come back on. Your oil pressure warning light means you have low oil pressure, temp warning light means the engine is over heating, alternator light means the charging system has a problem.
To reset the maintenance warning on a 2006 Mercedes-Benz SLK 280, turn the ignition key to position two without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. When you restart the car, the maintenance warning light should be reset. If the warning persists, repeat the process.
hold the buton on the cluster then turn the key to ignition
how to reset maintenance light on mercedes s550 amg
how to reset a srs warning light on 307 203 model
Check your owners manual it will tell how to shut it off or if it doesnt tell you then a dealer service dept. has to do it
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
Reset the battery
How do you reset the brake pad warning light for a 2005 c320 mercedes benz?