Turn the ignition on, with the engine off. Press the gas pedal to the floor three times in ten seconds.
see:- http://grumunkin.blogspot.com/2009/08/how-to-reset-service-indicator-on.html :-)
Most likely you will have three buttons labeled INFO-SETUP-RESET on the inside of your vehicle. If you press info until you get to the indicator for Oil Life, you should be able to press and hold reset to...reset it. Please refer to your owners manual in future cases
Go get it serviced.
anybody have any info on a 2009 ml320 how to reset service message?
1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.NOTE:If the indicator message illuminates when youstart the vehicle, the oil change indicator system did notreset. If necessary repeat this procedure.---Good luck on resetting the change oil light.
You will have to locate the Info button to reset your computer on a 2009 Sprinter after an oil change.
You need to access the info button on a 2009 sprinter van to reset the computer.
For 2009 Ford E350 automatic transmission:NOTE: For the next step, do not rotate the key fully to the START position.With transmission in the PARK position, rotate the key to the ON position.Locate the odometer reset button.Press the odometer reset button until the reset menu appears.Press and hold for a few seconds. Then release the button.Rotate the key to the OFF position.Rotate the key to the START position and release.Observe the odometer display.The CHANGE OIL indicator should not be lit at this time.
To reset the computer on a 2009 Sprinter van after an oil change simply check your user manual.
Turn key on, engine, off. Press gas pedal to the floor, 3 times within 10 secs. Start vehicle, and the oil light should be off.
The 2009 Jeep Patriot has 16 valves.
The 2009 Jeep Patriot has an inline 4 engine.