Want this question answered?
pull the bulb out on the gages. light should go off.
buy a chevy
The reset ranch light with the oil can on a Chevy C 5500 is a warning to check the oil. It can also mean that the oil needs to be changed.
It is very easy to reset the check engine light on a VW car. All you have to do is to push the wrench button located near the trip reset. You will hold it in while turning on the ignition. after the service message appears, let go of the wrench button and hold in the minute button. Turn the ignition off and the computer will reset.
Should be able to reset it by disconnecting the negative battery cable from the battery for ten minutes.
Disconnect the negative battery cable for 30 minutes.
Take it to Autozone (or your local parts store) and they will connect the scan tool to your truck, then you will press reset.
Is the " FUEL RESET " light in your dash on If the button has not popped up on the top of the inertia switch than the switch doe's not need to be reset
You can take it to an Autozone store and they can check the code for free. To reset the light, disconnect the battery for 10 minutes and reconnect.
What kind of car is it. Most of the little wrench symbols are for a maintanence light not for check engine. So it generally means somehting like a oil change or something.
No there is not a reset button. You can try disconnecting the negative battery cable for 5 minutes and that may reset the check engine light. If not it will have to be reset with an OBD2 scanner. Remember if you do not repair the problem that caused the light to come on you are wasting your time resetting it as it will just come back on.
Try taking the battery cable off for about two or three minutes. that should reset the light. If it comes back on, it may be because the controller sees a problem.