The timing light reset if i remember is behind the speedo. Remove the speedo head and clocks and look on the back. There should be a little jumper in some terminals and next to it there should be some empty terminals. Just remove jumper from one and put into other, this should reset timing belt light.
To reset the timing light on a 1997 Toyota Land Cruiser with a 1HZ engine, first, ensure the engine is at operating temperature. Disconnect the timing light's power and connect the inductive pick-up around the number one spark plug wire. Then, locate the timing adjustment screw on the distributor and turn it to the specified timing mark on the engine's timing cover. Finally, reconnect the timing light and check the timing against the manufacturer's specifications.
The timing light reset if i remember is behind the speedo. Remove the speedo head and clocks and look on the back. There should be a little jumper in some terminals and next to it there should be some empty terminals. Just remove jumper from one and put into other, this should reset timing belt light.
I believe that is a dealer only problem.
The timing is set with the aid of a scan tool. It can not be done with a timing light.The timing is set with the aid of a scan tool. It can not be done with a timing light.
The 2.2 litre four cylinder engine in a 1997 Toyota Camry has a timing BELT
timing marker for timing belt
You can disconnect the battery for about 30 minutes then reconnect. This may solve the problem. You will need to reset the time etc in the car.
1997 Avalon has a belt
how to reset the oil light on a 1997 mercedes e420
No , the 3.4 litre V6 engine in a 1997 Toyota Tacoma has a timing BELT
Toyota Camry 97 has a timing belt that should be replaced every 60,000 miles.
To reset the check engine light in a 1997 Toyota T100, you can disconnect the negative battery terminal for about 15 minutes. This will clear the engine control unit's memory and turn off the light. Alternatively, you can use an OBD-II scanner to erase the trouble codes that triggered the light. Always ensure that any underlying issues causing the light to activate are addressed first.