You will see two mounts on top front of engine that look like dogbones going from the engine to the radiator cross bar. by removing one bolt from each of the dogbones you can rotate the engine far enough to change the back sparkplugs.
you dont rotate it you have to pull the altnator off to change them
On my 93 lumina you remove the top engine mounts from the motor,rotate the motor forward(set park brake & put in N)until you can put the bolt back thru the hole in the lower side of mount to hold engine back. On mine you can only do this on driver side
How do you replace the blower motor on a 1994 chevy lumina euro?
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
Behind the dang motor
you have to take the motor brackets that hook the motor to the front of the car and then roll the engine forward carefully to get to the back three plugs.
Right next to the blower motor
what is the spark plug gap for a 98 Chevy lumina sedan 3.1Liter engine
There are four motor mounts located on a 1990 Chevy Lumina. Two on either side of the engine. One the rear and one in front of the engine.
Remove the wiring harness from the back of your 1998 Chevy Lumina heater motor. Remove the heater motor retaining bolts. Remove the fan from the front of the heater motor. Reverse the process to install the new heater.
motor mounts?
yes, same motor