0
What else can I help you with?
Can 3 phase 440 volt 50Hz motor run on 380 volt 50Hz supply?
Yes, But in this case the current will rise up by about 15% at full load. So if you will use the motor to drive any mechanical load take in your consideration the mechanical load Power (KW) must not exceed 85% of motor power (KW)
Will a 500volt 50hz squirrel cage motor run on 380volts 50hz?
No, the voltage of 500 volts is too high to operate a 380 volt motor.
Need 120 volt 60 hz digital clock to work on 100 volt 50 hz?
Probably won't work. Most clocks rely on the 60Hz to compute the time. If used on 50Hz, it will run slow. Use a clock that runs on DC or battery power. -Chris
I have a coolant motor with 420 volts in Lathe Machine but the supply voltage will be 480 volts. Can 420 volts 50Hz coolant motor can use in 480 volts 60Hz?
No, you'll burn your lathe motor up immediately. (it might last 30 seconds before it literally smokes.) You'll need to buy and install a "buck-boost" type transformer to drop the voltage from 480 to 420V. Best to have a qualified commercial electrician wire it up if you value your lathe.
Does 110V 60Hz to 110V 50Hz affect the clock?
Yes it is because the motor which drives it uses the hertz frequency to regulate itself. You might find if you move from a 60 hertz area to 50 hertz area and use a stepdown transformer to make your typical 120 volt appliance working on 230 volt that in the same percentual rate the time changes, for the hertz rate that is, app 20 % longer.
Can 220V 50Hz lighting fittings be used on 220V 60Hz power supply?
Yes. the voltages will be compatible. Though in North America it will probably be hard to find 220 volt rated lighting fittings as the common voltage rating for lighting fixtures is 120 volts.
What is the result of running a 460 volt 3 phase 60hz motor with 415 volts 3 phase 50hz?
It will run hotter. It will run slower, about 83% of nameplate speed. It will draw more than the nameplate current. You will only be able to get about 3/4 of rated horsepower. If the motor is loaded to more than this, it will not live very long.
Is a 9 volt battery a motor?
No, but it can power one
Can a 575 volt drive power a 480 volt motor?
It is not recommended to power a 480 volt motor with a 575 volt drive as the drive output voltage may exceed the motor's insulation rating, potentially causing damage to the motor. It is best to use a drive that matches the motor's voltage rating to ensure safe and efficient operation.
Will a 240V 60hz cooktop Summit Appliance Three Burner CR3240 work in with 220V 50hz power?
The resistive elements will work. On 240 volt 60 Hz North American ranges there are clock and timer controls. These are operated on 120 volts. That is why these ranges are fed with a three wire cable. Two hots (240 volts) and a neutral (120 volts to either "hot" leg). A 220 volt 50 Hz power supply will not have a split winding to supply the range with its 120 volt source.
Can you run a 570 volt motor on 480 volt three phase power supply?
No, it is not recommended to run a 570 volt motor on a 480 volt power supply. The motor is rated for a specific voltage to ensure optimal performance and prevent damage. Running the motor at a lower voltage could result in overheating and premature failure.
Can you run 220 volt motor compressor a 380 volt supply using power inverter?
No 380 volts is too wide a spread to use a 220 volt motor on.
