One way would be to find a liquid that is chemically inert to both metals and has a density between that of iron and that of aluminium. In such a liquid, the aluminium would float and the iron would sink.
Very easily, put a magnet on them it will attract the iron but not the aluminium.
A magnet would work fine, since aluminium isn't magnetic but iron is.
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
You can do this using a magnet. Iron is ferrous, therefore attracted to magnets, whereas aluminium is non-ferrous and is not attracted to magnets.
Iron is a magnetic metal, aluminium is not.So, a simple method is to use a magnet for this separation.Magnetic separation is frequently used to extract iron from wastes.
You can separate sand and iron marbles using a magnet. The iron marbles will be attracted to the magnet, allowing you to separate them from the sand.
To separate sawdust and iron fillings, you can use a magnet to attract and separate the iron fillings from the sawdust. The iron fillings will be drawn towards the magnet, allowing you to easily separate them from the sawdust.
To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.
One way to separate iron filings and aluminum filings is by using a magnet. Since iron is magnetic but aluminum is not, you can use a magnet to attract the iron filings and separate them from the aluminum filings easily. Simply pass the magnet over the mixture, and the iron filings will be attracted to the magnet, allowing you to separate them from the aluminum filings effectively.
Use a magnet. The magnet will remove the iron filings form the sand.
If it is a simple mixture of Fe and S you can use a magnet to separate iron. Of course, the method is not valid for an iron sulphide.
Because iron is always attracted to a magent, it will be pulled from the mixture. Aluminium will only be pulled by the magnet if certain conditions are met; as long as the metals aren't moving very quickly, a magnet has no effect on it and won't be pulled away.