<p>You can separate the sand by filtration, but still the salt (mainly sodium chloride) is dissolved in the water.
Then, you can separate the salt from water by distillation. The liquid you collect after water vapor is chilled is distilled water. You can use other methods to separate sand as sedimentation (usually slower than filtration) and salt as reverse osmosis.<p>
By evapouration. Boil the sea water until all the water has evapourated and your salt will be left. Or put it in the sun if you don't to boil.
Evaporation
Boiling off the water from a salt solution will separate the solid salt and water (which can be collected by a condenser).
First you mix both chalk and salt in water. From the solution that you get, you can filter the chalk out because it is non soluble in water. As for the salt, all there is to do is to just evaporate the water out.
Salt can dissolve while pepper cannot. So one way to separate salt and pepper would be to add water until all the salt dissolved and pouring the liquid out. Then, let the salt water solution evaporate, leaving salt behind! =D
Pour water into the mixture, let the salt dissolve.Then, put the wet-salty water-sand mixture through a sifter/filter.Take out the sand from the filter and dry it. COMPONENT 1 - SANDBoil the salt water solution and evaporate the water. The residue will be salt. COMPONENT 2 SALTDissolve the mixture in water first, before filtering the resultant solution. The residue is the sand, while the filtrate is the salt solution.
If a saline solution (dissolved salt in water) is gently heated, the water will evaporate, leaving salt crystals behind. If the water vapour is captured and condensed, the result is drinking water.
Boiling off the water from a salt solution will separate the solid salt and water (which can be collected by a condenser).
Evaporate water, then the salt would be separated.
to separate salt and water you can put it out side and let the water evaporate or to speed things up you can put it on the stove.
Water.
A saline sample is salt water. Evaporate the water away, and salt crystals will be left behind.
Since salt is soluble in water then you have to separate the mixture from sand first and this is done by filtration. The sand will be left in the filter paper and the filtererd solution would be that of salt and water. To get the salt you would then have to heat the solution and the water will evaporate leaving the salt behind.Filter Paper
You can separate them by filtration and it would help because when you add water the sand would stay because you would have to add cold water so that the sand will stay and the salt will go through.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
A hot plate will separate salt water.
Evaporate the water.
If the solution only consists of dissolved salt and water, the answer is simple, just use evaportation, water goes, salt stays.