If all three are mixed together you can separate the sawdust from the group with a Sieve filter with holes smaller than the sawdust, but larger than the sand/salt particles.
You could then use another sieve, if the sand and salt particles are significantly different in size,...OR add water to the mix....the salt will dissolve into solution leaving the sand behind. Pour off the water and let it evaporate, leaving the salt behind.
Put the mixture of sand, salt and sawdust into a quantity of water: the sand will sink to the bottom, sawdust will float and salt will dissolve.
Skim off (and dry) the floating sawdust. Pour off the water containing the dissolved salt. This is then heated to cause all the water to evaporate (leaving behind the salt). The remaining residue in the original container (wet sand) can now be dried off with heat.
If the particles are each of different size, these compounds may be separated based on two selective filtrations using appropriately-sized sieves. If this process is not possible, than separation may be accomplished by dissolving the salt in another polar solvent such as liquid ammonia or methanol (about 1 or 2 grams of NaCl will dissolve per 100mL of these solvents). The sand and sawdust could then be separated using their density, as the sawdust would float and the sand would sink. Evaporation the solvent would yield the solid salt.
No, black pepper is not a pure substance. Instead, black pepper is what we call a mixture substance. However, salt is a pure substance.
this is probably the best reply to your answer : http://www.newton.dep.anl.gov/askasci/chem03/chem03115.htm Personally I think that reverse osmosis is the Most User-Friendly solution on the commercial market Good luck
Refined salt (sodium chloride) is a pure substance; but kosher salt is only an error because salt is an inorganic product..
no, it's a mixture. Salt is a pure substance, as is water, but together they are a mixture.
Yes, assuming you have no gravel smaller than the sawdust. Just think about it for a second.
Add the mixture of sawdust, sand and salt to water. The sawdust will float and can be skimmed form the surface. The salt will dissolve in the water. The sand can be filtered from the mixture which remains. The salt water solution which remains can be heated and the water will evaporate leaving the salt behind.
A method is repeated processes of crystallization/recrystallization, for a supplementary refining.But it is a nonsense in your question: salt or pure salt are both sodium chloride, supposed to be pure.
Table salt is NOT a mixture but a pure compound. It can not be separated.
Pure maple syrup doesn't contain salt.
Dissolve the whole salt in a warm water, then filter it out. By evaporating the filtrate, we shall get pure salt. The impurities will left on the filter paper(as these are insoluble in water).
pour water in the cup, the saw dust flouts up the sand stays at the bottom
The process is distillation.
Use a magnet to seperate the iron. Then, add water to dissolve the salt and float the sawdust. Skim off, sieve or filter the solution to seperate the sawdust. Let the water evaporate, leaving the salt behind.
Add water to the mixture. The sand will sink to the bottom, the wood will float to the top and the salt will dissolve in the water.
Salt is a compound made from Sodium and Chlorine. Its chemical formula is NaCl.Although made from two separate elements, a handful of salt is a pure substance not a mixture because it is a compound.
Yes. Distillation serves to separate pure water from saltwater. However, what remains is not salt, but highly-salinated water called "slurry".