See http://wiki.answers.com/Q/What_is_the_belt_timing_for_LD28
Try eBay.
Timing on a diesel? your haveing a laugh?
To start timing on the 2C Turbo diesel engine, you will have to locate or distinguish camshaft timing marks.
If you are referring to ignition timing, diesel ignition timing is primarily controlled by the injector timing. This is also why diesel engines run such high injector pressures. The timing is very carefully controlled by the vehicles computer.
There is no ignition timing to set on a diesel. If you have somehow disturbed the injector timing you'll have to take it to a dealer, as setting that requires special equipment.
There are two timing settings on the LD28. The injection pump has marks on the crank and pump pulleys. The belt has two marks to line up with the marks. If you are reusing the timing belt the tooth count between the marks is twenty cogs. These are aligned with the pulley marks up. If you need the cam driving chain procedure it would require a diagram to make it easy to follow so re-post and I will try to educate myself to do that. Good luck.
What about it?
One can set an injector for a 320 diesel marine engine by setting the timing and duration.
If it is petrol then it is probably the ignition timing not set correctly. If it is diesel then it is probably the injection pump timing not set correctly
The timing marks on a Nissan ZD 30 diesel engine can be found on the front of the flywheel. The timing marks are scattered around the outside of the flywheel.
In order to set the timing on a SX4 1.9 diesel, you'll need to follow a few steps. Here are the steps you need to take: Locate the timing marks on the timing belt. Ensure that the timing belt is properly tensioned. Using a timing light, set the timing belt to the correct timing. Using adjustable wrenches, tighten the timing belt tensioner. Check that the timing belt is at the correct tension. Recheck the timing with the timing light. Start the engine and check for any misfires. Check the timing again to make sure it is correct.Following these steps should ensure that the timing on your SX4 1.9 diesel is properly set. If you run into any issues, it is recommended that you consult a professional mechanic.
The best way to get an accurate answer for the crankshaft timing on a Reanult Clio Diesel 1991 is to look in the service manuel. That should tell exactly how to set the timing.